Cartoon Frankenstein

Although a frightening creation myth, this cartoon Frankenstein pin is sure to put a smile on everyone’s face. The Frankenstein monster is a creature in a novel written by Mary Shelley in 1818. A scientist learns how to create life and creates this being in the likeness of man. The creature starts out as an innocent and loving being. As the people begin to inflict violence on him, he develops hatred towards humans.

For years this creature has been pictured and changed, but the scars on his face and he bolt in his neck distinguish him as Frankenstein. To keep these distinguishing marks these pins are more of a humorous view of this creature. Use Glassline paints to add any details to the design.

cartoon frankenstein, frankenstein monster, frankenstein, halloween pins


  • Green face glass
  • Black hair glass
  • Gray bolt glass
  • Red glob nose
  • Eyes
  • Glassline black paint
  • Pattern
  • Beeswax or Chap Stick
  • Glass saw
  • Glass Cleaner choice
  • Lint free towel
  • Kiln
  • Prepared kiln shelf
  • Protective glasses
  • Two part Epoxy
  • Pin Back

  • Directions

    1. Copy and cut the stencil.

    2. Lay down the paper pattern on the appropriate colorful glass and copy around the stencil with a permanent marker. Liberally coat the drawing with beeswax or Chap Stick.

    3. A glass saw is considered necessary to cut out the shape. Make a point of cutting close to the outline to keep the form and all the meticulous particulars.

    4. Bathe with soap and rinse in plain water or employ glass cleaner to do away with any drawings and scum. Dry the pieces.

    5. Pose the sections on a ready kiln ledge and pose the shelf in the unit. Be sure to grasp the glass by the edge to avoid fingerprints.

    6. Add any details, such as scars, etc with Glassline paints. Use hairspray to secure eyes and nose during firing if needed.

    7. Close the top or door. Turn on the oven.

    8. View the task at close to 1325 degrees Fahrenheit. When peeping at your fused glass wear glasses with IR and UV shield.

    9. As soon as the project possesses your wanted look, switch off and disconnect the kiln. If the unit is manufactured with heavy fire bricks, you can let it cool off by it’s self. If however it is created with ceramic fiber, the kiln must remain on and observed so that it doesn’t cool off any more than approximately 300 degrees Fahrenheit per hour.

    10. When the temperature goes down underneath 100 degrees Fahrenheit, the unit may be opened.

    11. When the project has cooled down to room temperature, you can add a pin back. Hold on the pin back with a two part epoxy.

    Cartoon Frankenstein Pattern

    cartoon frankenstein, frankenstein monster, frankenstein, halloween pins

    Return from this page to one of the following pages:

    Halloween Gift

    Seasonal Pins

    Fusing Projects

    Cartoon Frankenstein to Glass Fusing Made Easy

    Fused Glass Patterns

    E-mail Address
    First Name (optional)

    I keep this private.

    Site Affiliate Links

    Delphi Glass