Kiss Me I'm Irish

This Kiss Me I’m Irish pattern is one of the popular Irish slogans during this season. You see it usually placed on round metal pins and worn as one of the Irish signs that St. Patrick’s Day is here. That doesn’t mean you couldn’t write any desired slogans on this piece. With this Irish sign you just might get lucky!

The green clover is made out of one piece of any color of green glass desired. Glassline paints are used to add the wording to the piece. The nice thing about Glassline paints is that you can use a toothpick to remove any mistakes or clean up around the wording.

kiss me, irish slogans, irish signs, slogans, irish sign

Materials:

  • Pattern
  • Green glass
  • Glassline paint
  • Chap Stick or Beeswax
  • Glass saw
  • Fiber Paper
  • Kiln
  • Prepared kiln shelf
  • Protective glasses
  • Two part Epoxy
  • Pin Back


  • Directions:

    1. Print the guide on card stock.

    2. With a pair of cutters, cut the guide.

    3. Position the sections on the right glass shade.

    4. Mark around the design with a permanent marker.

    5. Generously cover up the drawing with beeswax or chap stick.

    6. Position the traced glass on a glass saw and cut the guide. Cut along the sketching so that the design is precise.

    7. Position the newly cut pieces in a container of clean water while cutting any other glass. This deed will make for an easier cleaning of the glass.

    8. Cleanse every piece with detergent, a scratch pad and some water.

    9. Dry the glass pieces using a lint free wipe.

    10. Adorn as preferred.

    11. While holding each of the pieces by the edge, arrange the glass on a prepared kiln shelf.

    12. Position the kiln shelf inside the kiln.

    13. Shut the lid or door and switch on the unit.

    14. Dressed in eye wear with IR and UV protection, inspect the item at roughly 1325 degrees Fahrenheit.

    15. When the project has the desired appearance, take the item down to the proper anneal temperature and soak.

    16. Turn off the unit.

    17. Let the piece to cool down by its self.

    18. Once the pyrometer goes down beneath 100 degrees Fahrenheit, the oven may be opened.

    19. Attach a pin backing or fuse the piece into a further plan.



    Kiss Me I'm Irish Pattern

    kiss me, irish slogans, irish signs, slogans, irish sign






    Return from this page to one of the following pages:

    St Patricks Day

    Seasonal Pins

    Fusing Projects

    Kiss Me to Glass Fusing Made Easy

    Fused Glass Patterns

    E-mail Address
    First Name (optional)
    Then

    I keep this private.

    Learn Glass Fusing

    Learn More


    Site Affiliate Links

    Delphi Glass