Golf Bag

A golf bag design that is the perfect Fathers Day gift for Dad, especially if he is a golfer. Fathers Day is a fantastic time to design items for the male figure in your life.

Every golfer enjoys receiving items that are related to golf. So, why not make him a Fathers Day golf gift using this simple pattern. Design a hanging pocket with this bag on the outside. Hang it on the wall and fill it with tickets for a round of golf. Get creative. Use this design as the centerpiece of the project and add a few tiny golf balls.

golf bag, fathers day gift, fathers day, fathers day golf gift


  • Pattern
  • Bag glass
  • Club glass
  • Glassline paints for details
  • Glass cleaner of choice
  • Chap Stick or Beeswax
  • Glass saw
  • Fiber Paper
  • Kiln
  • Prepared kiln shelf
  • Protective glasses
  • Two part Epoxy
  • Pin Back

  • Directions:

    1. Copy and cut the pattern.

    2. Set the paper pattern on the suitable color glass and copy about the guide with a permanent marker. Liberally cover the traced design with beeswax or Chap Stick.

    3. A glass saw is considered necessary to cut the design. Cut near the outline to preserve the shape and all the tiny particulars.

    4. Launder with soap and rinse in clear water or use glass cleaner to delete any design and scum. Dry the items.

    5. Before firing the piece use Glassline paints to add any details. Allow the paint to dry thoroughly before placing inside the kiln.

    6. Place the sections on a prepared kiln ledge and put the shelf in the kiln. At all times grasp the glass by the rim to avert fingerprints.

    7. Shut the top or door. Activate the unit.

    8. Observe the fused piece at roughly 1325 degrees Fahrenheit. Whenever looking at your fused glass have on glasses with IR and UV protection.

    9. Once the project possesses your required appearance, switch off and disconnect the oven. If the kiln is fabricated with thick fire bricks, you can allow it to cool off on its own. If however it is assembled with ceramic fiber, the oven must remain on and supervised so that it doesn’t cool down more than about 300 degrees Fahrenheit an hour.

    10. Once the pyrometer falls lower than 100 degrees Fahrenheit, the unit may be opened.

    11. As soon as the glass has cooled down to room temperature, add a brooch back. Hold on the brooch back with a two part epoxy.

    Golf Bag Pattern

    golf bag, fathers day gift, fathers day, fathers day golf gift

    Return from this page to one of the following pages:

    Fathers Day

    Seasonal Pins

    Fusing Projects

    Golf Bag to Glass Fusing Made Easy

    E-mail Address
    First Name (optional)

    I keep this private.

    Learn Glass Fusing

    Learn More

    Site Affiliate Links

    Delphi Glass